Spaces

The space object represents the surface entity that displays the information (name, area, perimeter, etc.) of a space or room with a hatch pattern and label. A room is defined as any closed space delimited by walls and/or columns on all four sides. Walls and columns can be at different elevations, provided that they are part of the same floor.

Spaces can be created from an insert point inside a room delimited by walls and/or columns, from curves (closed an planar) and from surfaces (planar)

4.5 Space control point

Create the Ground Floor spaces:

  1. Enable the Plan View mode of the Ground floor in the Top Viewport, in the Level Manager dialog.
  2. Run the _vaSpace command VA_Space.jpg to create a new space.
  3. Specify an insert point inside an area enclosed by walls (if the area is opened, the space data won't be detected).
  4. The Space object dialog box will be displayed. Enter the space details: Name, Type of area (Usable or Built) and Style.
  5. Press Enter or Ok to exit the command. The space is created with a label that displays its information.

The space object has two control points: one point for the space position, (which detects the surrounding walls) and another point for the the label position.

Create and edit Space styles

Run the _vaSpaceStyles command to open the Space styles dialog. There you can create new space styles and define for each style the information displayed in the label, or the space attributes.

Change Space properties

The parameters of the Space object (like other VisualARQ objects) can be edited in two different ways:

  •  1. VisualARQ properties in Rhino properties dialog box.
  •  2. VisualARQ Object properties dialog box.

Documentation topics:

Back to Index menu